Loading ...
Loading ...
Loading ...
Function introduction
EN
Copyright Qingdao Hantek Electronics Co., LTD HTM200 user manual
27
File menu table:
Function
Settings
Descriptions
File name
- -
The file name is automatically generated when the USB
flash drive or SD card is inserted.
Storage
device
U disk
SD card
When inserting a USB flash drive or SD card, select the
corresponding storage device. The SD card storage
function is optional.
Time
interval
10 s
30 s
1 min
10 min
30 min
60 min
Set the interval for saving temperature data to a USB
flash drive or SD card.
4G interval
10 s
30 s
1 min
10 min
30 min
60 min
Set the interval for uploading temperature data to the
network.
Table 5.4 File menu table
Function menu descriptions:
Menu item
Descriptions
Edit
Edit the parameters of selected items.
Start
Start saving data, and automatically enter the < List > page.
Upload
Hold down the soft button for 3 seconds to enable the 4G network
transmission function. After the network transmission function is
enabled, all other buttons are disabled except the power button
and the alarm button . Hold down the Return soft button for 3
seconds to disable the network transmission function.
Return
Exit the < File > page and return to the < System > page.
Table 5.5 Function menu descriptions
Steps to save data files
1 Insert a MicroSD card or USB memory.
2 Press to enter the < File > page.
3 Select USB flash drive or SD Card.
4 Set the time interval.
Time interval options: 5 s, 30 s, 1 min, 10 min, 30 min, 60 min.
5 Press the start button, the instrument will start recording data, and the < List > page
Loading ...
Loading ...
Loading ...