Loading ...
Loading ...
Loading ...
Function introduction
EN
Copyright Qingdao Hantek Electronics Co., LTD HTM200 user manual
23
5 Function introduction
5.1 Measurement list
The instrument will enter < List > after startup. If you are on any other page, you
can enter the < List > page by pressing .
The < List > page mainly highlights the measurement results. At the same time, change
the font color to display the current sorting results. When the measured temperature is
above the upper limit or below the lower limit, the color of the temperature value on the
< List > page will turn red.
The display page is shown as following:
Figure 5.1 Measurement list
1 Number of channels
2 Temperature value
3 Type of thermocouple
5.2 Measurement bar chart
After the instrument is started, enter <List>. Then press the bar chart button to
enter < Bar chart >. If you are on any other page, you can just press to enter
the < Bar chart > page.
The < Bar chart > page mainly highlights the proportion of the measurement results to
the limit value.
Loading ...
Loading ...
Loading ...