Loading ...
Loading ...
Loading ...
Quick Start
EN
HTM200 user manual Copyright Qingdao Hantek Electronics Co., LTD
12
Figure 4.2 Adjusting the stand
4.3.2 Charging
After pressing the power button , if the instrument is not responding, it may indicate
that the battery is dead.
You can charge the instrument in the following ways:
Method 1: Charge the instrument through a power adapter
Connect the instrument to a power socket through the standard power adapter (5V/2A)
and Type-C data cable for charging.
Method 2: Charge the instrument through a Type-C interface
Connect the instrument to a computer or other devices (5V/500mA) for charging
through a Type-C data cable.
Charging status description:
When charging, in the case of battery installation, the power indicator light is red, and
the battery box at the upper right corner of the screen shows the change of electric
quantity. If no battery is installed, the power indicator light will be red and blinking. The
battery box on screen will also blink.
When the battery is full, the instrument will automatically stop charging and the power
button indicator light will turn off.
When the battery box in the upper right corner of the screen is blank, the battery is
about to be used up.
When the battery is low, the instrument will prompt "power off after 5s". In order to avoid
automatic shutdown due to insufficient power, please charge in time.
Loading ...
Loading ...
Loading ...