Tripp Lite B140-101 Owner's Manual

Loading ...

TO DVI SOURCE

RJ45 JACK

Cat5/5e/6

PATCH CABLE

LOCAL UNIT

POWER

JACK

REMOTE UNIT

TO DVI MONITOR

B140-101 — Up to 100 ft. (30.5 m) at 1024 x 768 (60 Hz), or up to 50 ft. (15 m) at 1920 x 1080 (60 Hz)

B140-1P1-WP-1 — Up to 75 ft. (23 m) at 1024 x 768 (60 Hz), or up to 50 ft. (15 m) at 1920 x 1080 (60 Hz)

B140-101X and B140-1A1-WP — Up to 200 ft. (60 m) at 1024 x 768 (60 Hz),

or up to 150 ft. (45 m) at 1920 x 1080 (60 Hz)

Standard Extender Kit Installation

(B140-101, B140-1P1-WP-1, B140-101X, B140-1A1-WP)

Notes:

1. The diagram below shows a B140-101X installation. Installation will be the same

for the B140-1A1-WP. Installation will be similar for the B140-101 and

B140-1P1-WP-1, except they will not require external power.

2. Test to make sure the entire installation works properly before pulling cables through

ceilings/walls.

3. To achieve maximum distance and performance, use 24 AWG Solid Wire Cat5e/6

cable. Using stranded wire cable, or cable with a gauge (AWG) size higher than

24 AWG will result in lesser performance and shorter extension distance. Tripp Lite

N202-Series (Cat6) patch cables are made with 24 AWG solid wire cabling.

Make sure power to the DVI source is turned off.

Connect the built-in DVI connector on the B140-101 or B140-101X

local unit to the DVI source, or connect the B140-1A1-WP or

B140-1P1-WP-1 local unit to the source using a Tripp Lite

P561-Series DVI cable.

17-08-508-933776.indb 9 11/27/2017 11:47:46 AM

Loading ...

Tripp Lite B140-101 DVI over Cat5/6 Passive Extender Kit, Box-Style Transmitter/Receiver for Video, Up to 100 ft. 30 m, TAA