Tripp Lite B140-101 Owner's Manual

Loading ...

Connect the B140-1P0 DVI-D Single Link connector to the monitor or

connect the B140-1A0 or B140-1A0-WP-1 to the monitor using a

Tripp Lite P561-Series DVI-D Single Link Cable. The green RJ45 LED on

the B140-1P0 will illuminate to indicate the unit is receiving power from

the monitor.

Repeat step 9 for each additional monitor you are connecting.

Turn on the power to the DVI source. The orange RJ45 LEDs illuminate

on the B140-002, B140-004 and B140-1A0, and the orange LED

illuminates on the B140-1A0-WP-1 to indicate the unit is receiving

a signal from the source. The image should now be displayed on the

connected monitors.

If necessary, use the Equalization control on the B140-1A0 or

B140-1A0-WP-1 to adjust the video image.

Note: An improper Equalization setting can cause the monitor not to display a

picture at all. Try each Equalization setting until an acceptable image is displayed.

Standard Extender/Splitter Installation

17-08-508-933776.indb 16 11/27/2017 11:47:48 AM

Loading ...

Tripp Lite B140-101 DVI over Cat5/6 Passive Extender Kit, Box-Style Transmitter/Receiver for Video, Up to 100 ft. 30 m, TAA