Tripp Lite B140-101 Owner's Manual

Loading ...

Standard Extender/Splitter Installation

Make sure the DVI source is powered OFF.

Connect the DVI source to the DVI port on the B140-002 or

B140-004 labeled INPUT using a Tripp Lite P561-Series DVI-D Single-

Link Cable.

Optional for B140-004: Connect a DVI monitor to the DVI port on the

B140-004 marked LOCAL using a Tripp Lite P561-Series DVI-D Single-

Link Cable.

Connect the external power supply to the B140-002 or B140-004

local unit and plug it into a Tripp Lite Surge Protector, PDU or UPS. The

green RJ45 LEDs and red Power LED on the B140-004 will illuminate

to indicate power is being received from the external power supply. The

green RJ45 LEDs on the B140-002 will illuminate to indicate power is

being received from the external power supply.

Using Cat5e/6 cable, connect one of the RJ45 output ports on the local

unit to the RJ45 input port on the B140-1P0, B140-1A0 or

B140-1A0-WP-1 remote unit.

Repeat step 5 for each additional remote unit you are connecting.

B140-1A0 and B140-1A0-WP-1 only: Connect the external power

supply to the B140-1A0 or B140-1A0-WP-1 and plug it into a Tripp Lite

Surge Protector, PDU or UPS. The green RJ45 LED on the B140-1A0

and the green LED on the B140-1A0-WP-1 will illuminate to indicate

that the unit is receiving power.

Repeat step 7 for each additional B140-1A0 or B140-1A0-WP-1 in the

installation.

17-08-508-933776.indb 15 11/27/2017 11:47:48 AM

Loading ...

Tripp Lite B140-101 DVI over Cat5/6 Passive Extender Kit, Box-Style Transmitter/Receiver for Video, Up to 100 ft. 30 m, TAA