Miele DGC 7640 HC Pro Stainless steel/Clean Steel – All steam ovens

User Manual - Page 168

For DGC 7640 HC.

PDF File Manual, 196 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
Problem solving guide
168
Problem Cause and remedy
F138 The combination steam oven is leaking. Water has
run into the floor tray.
Switch the combination steam oven off and back
on again.
If the fault message appears again, contact the
Miele Customer Service Department.
F196 There is a fault.
Switch the combination steam oven off and back
on again.
The filter in the floor of the oven compartment is not
inserted.
Switch the combination steam oven off.
Insert the floor filter.
Switch the combination steam oven back on
again.
If the fault message appears again, contact the
Miele Customer Service Department.
“HydroClean” continuedap-
pears when the ma-
chine is switched on.
The cleaning process has been cancelled due to a
power cut or because the appliance has been
switched off.
The combination steam oven automatically performs
the wash and drying phase once it is switched back
on to remove any cleaning agent residues. This pro-
cess takes approx. 1hour 30minutes. After a cancel-
lation during the drying phase, the process takes ap-
prox. 30minutes.
Normal operation of the combination steam oven is
only possible once this has been completed.
Follow the instructions on the display.
Note that the cleaning result is not optimal.
A message not listed in
this table is appearing
on the display.
There is an electronic module fault.
Disconnect the power supply to the combination
steam oven for approx. 1minute.
If the problem persists after the power supply has
been restored, please contact the Miele Customer
Service Department.
Loading ...
Loading ...
Loading ...