Loading ...
Loading ...
Loading ...
4
3.0 IMPORTANT SAFETY INSTRUCTIONS
1. Read and understand the entire instruction manual before attempting assembly or operation.
2. All JET band saws are designed and intended for use by properly trained and experienced personnel only.
If you are not familiar with the proper and safe operation of a band saw, do not use until proper training and
knowledge have been obtained.
3. Always wear approved safety glasses/face shields while using this machine.
4. Make certain the machine is properly grounded.
5. Before operating the machine, remove tie, rings, watches, other jewelry, and roll up sleeves above the
elbows. Remove all loose clothing and confine long hair. Do NOT wear gloves.
6. Keep the floor around the machine clean and free of scrap material, oil and grease.
7. Keep machine guards in place at all times when the machine is in use. If removed for maintenance
purposes, use extreme caution and replace the guards immediately.
8. Do NOT over reach. Maintain a balanced stance at all times so that you do not fall or lean against blades
or other moving parts.
9. Make all machine adjustments or maintenance with the machine unplugged from the power source.
10. Use the right tool. Don't force a tool or attachment to do a job which it was not designed for.
11. Replace warning labels if they become obscured or removed.
12. Make certain the motor switch is in the OFF position before connecting the machine to the power supply.
13. Give your work undivided attention. Looking around, carrying on a conversation, and "horse-play" are
careless acts that can result in serious injury.
14. Keep visitors a safe distance from the work area.
15. Use recommended accessories; improper accessories may be hazardous.
16. Make a habit of checking to see that keys and adjusting wrenches are removed before turning on the
machine.
17. Always keep hands and fingers away from the blade when the machine is running.
18. Never hand hold the material. Always use the vise and clamp it securely.
19. Keep belt guard, blade guards, and wheel covers in place and in working order.
20. Always provide adequate support for long and heavy material.
21. Use a sharp blade and keep machine clean for best and safest performance.
22. Failure to comply with all of these warnings may cause serious injury.
WARNING: This product can expose you to chemicals including titanium dioxide which is known to the
State of California to cause cancer, and lead which is known to the State of California to cause cancer and
birth defects or other reproductive harm. For more information
g
o to http://www.p65warnin
g
s.ca.
g
ov.
WARNING: Some dust, fumes and gases created by power sanding, sawing, grinding, drilling, welding
and other construction activities contain chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm. Some examples of these chemicals are:
lead from lead based paint
crystalline silica from bricks, cement and other masonry products
arsenic and chromium from chemically treated lumber
Your risk of exposure varies, depending on how often you do this type of work. To reduce your exposure to
these chemicals, work in a well-ventilated area and work with approved safety equipment, such as dust
masks that are specifically designed to filter out microscopic particles. For more information go to
http://www.p65warnings.ca.gov/ and http://www.p65warnings.ca.gov/wood.
Loading ...
Loading ...
Loading ...