Loading ...
Loading ...
Loading ...
Do not connect the USB cable until instructed to do so on the screen
2 Insert the Software and Documentation CD.
3 Click Install.
4 Click Agree.
5 Click Suggested.
6 Click Wireless Network Attach.
7 Connect the cables in the following order:
a Temporarily connect a USB cable between the computer on the wireless network and the printer.
Note: After the printer is configured, the software will instruct you to disconnect the temporary USB
cable so you can print wirelessly.
b If your printer has faxing capabilities, then connect the telephone cable.
8 Follow the on‑screen instructions to complete the software installation.
9 To allow other computers on the wireless network to use the wireless printer, follow steps 2 through 6 and
step 8 for each computer.
Installing the printer on a wireless network (Macintosh)
Prepare to
configure
the printer
1
Locate the printer MAC address on the sheet that shipped with the printer. Write the last six digits of the
MAC address in the space provided below:
MAC address: ___ ___ ___ ___ ___ ___
2 Connect the power cable to the printer and then to a properly grounded electrical outlet, and then turn the
power on.
Additional printer setup 41
Loading ...
Loading ...
Loading ...