Loading ...
Loading ...
Loading ...
Verifying printer setup
Once all hardware and software options are installed and the printer is turned on, verify that the printer is set
up correctly by printing the following:
• Menu settings page—Use this page to verify that all printer options are installed correctly. A list of installed
options appears toward the bottom of the page. If an option you installed is not listed, then it is not installed
correctly. Remove the option and install it again.
• Network setup page—If your printer is a network model and is attached to a network, print a network setup
page to verify the network connection. This page also provides important information that aids network
printing configuration.
Printing a menu settings page
Print a menu settings page to review the current menu settings and to verify printer options are installed
correctly.
Note: If you have not made any menu item settings changes yet, then the menu settings page lists all the
factory default settings. Once you select and save other settings from the menus, they replace the factory
default settings as user default settings. A user default setting remains in eect until you access the menu
again, choose another value, and save it. To restore the factory default settings, see
“Restoring the factory
default settings” on page 177.
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Reports appears, and then press .
4 Press the arrow buttons until Menu Settings Page appears, and then press .
Printing a network setup page
If the printer is attached to a network, then print a network setup page to verify the network connection. This
page also provides important information that aids network printing configuration.
1 Make sure the printer is on and Ready appears.
2 From the printer control panel, press .
3 Press the arrow buttons until Reports appears, and then press .
4 Press the arrow buttons until Network Setup Page appears, and then press .
Note: If an optional internal print server is installed, Print Network <x> Setup Page appears.
5 Check the
first
section on the network setup page, and
confirm
that Status is “Connected.”
If Status is “Not Connected,” the LAN drop may not be active, or the network cable may be malfunctioning.
Consult a system support person for a solution, and then print another network setup page.
Additional printer setup 37
Loading ...
Loading ...
Loading ...