Loading ...
Loading ...
Loading ...
4 Align the notches on the memory card with the ridges on the connector.
2
1
1 Notches
2 Ridges
5 Push the memory card straight into the connector until it snaps into place.
6 Replace the system board cover and close the system board door.
1
2
3
Installing a flash memory or firmware card
Note: This task requires a
flathead
screwdriver.
The system board has two connections for an optional
flash
memory or
firmware
card. Only one of each may
be installed, but the connectors are interchangeable.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or
memory devices sometime after setting up the printer, then turn the printer o, and unplug the power
cord from the wall outlet before continuing. If you have any other devices attached to the printer, then
turn them o as well, and unplug any cables going into the printer.
Additional printer setup 20
Loading ...
Loading ...
Loading ...