Loading ...
Loading ...
Loading ...
Make sure the printer has enough memory
Add printer memory or an optional hard disk.
Unexpected page breaks occur
Increase the Print Timeout value:
1 From the printer control panel, press .
2 Press the arrow buttons until Settings appears, and then press .
3 Press the arrow buttons until Setup Menu appears, and then press .
4 Press the arrow buttons until Timeouts appears, and then press .
5 Press the arrow buttons until Print Timeout appears, and then press .
6 Press the arrow buttons until the value you want appears, and then press .
Solving option problems
Settings chosen from the software program or application can change or override settings chosen from the
printer control panel. If an option is not functioning, then make sure it is selected in the software as well as the
printer control panel.
Option does not operate correctly or quits after it is installed
These are possible solutions. Try one or more of the following:
Reset the printer
Turn the printer o, wait about 10 seconds, and then turn the printer on.
Check to see if the option is connected to the printer
1 Turn the printer o.
2 Unplug the power cord from the wall outlet.
3 Check the connection between the option and the printer.
4 Connect the power cord to a properly grounded wall outlet.
Make sure the option is installed correctly
Print a menu settings page and check to see if the option is listed in the Installed Options list. If the option
is not listed, then reinstall it. For more information, see the hardware setup documentation that came with
the option.
Troubleshooting 182
Loading ...
Loading ...
Loading ...