Loading ...
1.0 IMPORTANT SAFETY
INSTRUCTIONS
- Misuse of this machine can cause serious injury.
- For safety, machine must be set up, used and
serviced properly.
- Read, understand and follow instructions in the
operator’s manual and all labels affixed to the
machine.
When setting up machine:
- Always avoid using machine in damp or poorly
lighted work areas.
- Always be sure machine is securely anchored to
the floor or bench.
- Always keep machine guards in place.
- Always put start switch in OFF position before
plugging in machine.
When using machine:
- Never operate with machine guards missing.
- Always wear safety glasses with side shields (See
ANSI Z87.1)
- Never wear loose clothing or jewelry.
- Never overreach ⎯ you may slip and fall into the
machine.
- Never leave machine running while you are away
from it.
- Always shut off the machine when not in use.
When servicing machine:
- Always unplug machine from electrical power while
servicing.
- Always follow instructions in operators and parts
manual when changing accessory tools or parts.
- Never modify the machine without consulting JET.
1.1 Machinery general safety
warnings
1. Always wear protective eye wear when
operating machinery. Eye wear shall be impact
resistant, protective safety glasses with side
shields which comply with ANSI Z87.1
specifications. Use of eye wear which does not
comply with ANSI Z87.1 specifications could
result in severe injury from the breakage of the
eye protection.
2. Wear proper apparel. No loose clothing or
jewelry which can get caught in moving parts.
Contain long hair. Rubber soled, nonslip
footwear is recommended for best footing.
3. Do not overreach. Failure to maintain a proper
working position can cause you to fall into the
machine or cause your clothing to get caught —
pulling you into the machine.
4. Keep guards in place and in proper working
order. Do not operate the machine with the
guards removed.
5. Avoid dangerous working environments. Do not
use stationary machine tools in wet or damp
locations. Keep work areas clean and well lit.
6. Avoid accidental starts by being sure that the
start switch is in the “OFF” position before
plugging in the machine.
7. Never leave the machine running while
unattended. The machine shall be shut off
whenever it is not being used.
8. Disconnect the electrical power before
servicing, whenever changing accessories or
when general maintenance is done on the
machine.
9. Maintain all machine tools with care. Follow all
maintenance instructions for lubricating and the
changing of accessories. No attempt shall be
made to modify or have makeshift repairs done
to the machine. This not only voids the warranty
but also renders the machine unsafe.
10. If there is any risk of tipping or sliding, the
machinery must be anchored to the floor.
11. Secure your work. Use clamps or a vise to hold
your work, when practical. It is safer than using
your hands and it frees both hands to operate
the machine.
12. Never brush chips away while the machine is in
operation.
13. Keep work area clean. Cluttered areas invite
accidents.
14. Remove adjusting keys and wrenches before
turning the machine on.
15. Use the right tool. Don’t force a tool or
attachment to do a job for which it was not
designed.
16. Use only recommended accessories and follow
manufacturer’s instructions pertaining to them.
17. Keep hands in sight and clear of all moving
parts and cutting surfaces.
18. All visitors should be kept at a safe distance
from the work area. Make your workshop
completely safe by using padlocks, master
switches, or by removing starter keys.
19. Know the tool you are using; its application,
limitations, and potential hazards.
20. This machine must be grounded in accordance
with the National Electrical Code and local
codes and ordinances. The work should be
done by a qualified electrician. The machine
should be grounded to protect the user from
electrical shock.
Loading ...
Loading ...
Loading ...