Loading ...
Loading ...
Loading ...
www.petsafe.net 21
Test Light Instructions
The Receiver Collar should not be on your dog when the system
is tested. Your pet may receive an unintended correction.
1. Set the correction level to 2 or above.
2. Hold the Test Light contacts to the Contact Points (J)
3. Hold the Receiver Collar at your dog’s neck height
with the Contact Points pointing up (K) and the
Correction Level Button facing the Boundary Wire.
Slowly walk toward the Boundary Wire until you hear
the warning tone and see the Test Light flash (L).
J
Note: The Receiver Collar is waterproof,
which can make the beep hard to hear.
Save the Test Light for future testing.
If the Test Light does not flash, refer to the
Troubleshooting section in your PetSafe
®
Elite Little Dog In-Ground Fence
™
Operating
and Training Guide or contact the Customer
Care Center.
K
Boundary
Wire
L
Loading ...
Loading ...
Loading ...