Loading ...
Loading ...
Loading ...
Using MBOX Studio
50
Using the Tuner
MBOX Studio provides a built-in tuner that can be used from both the top panel and in MBOX Control.
To use the tuner:
1 On the MBOX Studio top panel, press the TUNE button.
2 Select the Tuner input by pushing the top panel left encoder until the correct input number is shown.
Each press cycles through INST input 1 or 2 (MBOX Studio must detect an instrument connection) and the Talkback Mic input. The
Talkback Mic will be the Tuner source if nothing is connected to INST 1 or 2. When MBOX Studio detects only one Instrument input
connection, that input is automatically chosen for the tuner.
3 Begin playing and tuning.
• The on-screen Tuner window shows a traditional tuner bar.
• The detected pitch is shown in the top panel input meters.
• The horizontal input gain LEDs indicate sharp or flat by lighting red from center to the left for flat and to the right for sharp.
4 Press TUNE again to exit Tuner mode and close the on-screen Tuner window.
Tuner Options
You can vary the Tuning reference pitch, and Mute the Tuner output signal in the MBOX Control Tuner window.
To set the Tuning reference:
In MBOX Control Tuner window, choose a pitch from the Reference selector.
To mute:
Click the MUTE button in the Tuner window.
Setting the tuner input (shown at left) and tuning (shown at right)
Tuner
1 23456
1 23456
MBOX STUDIO
TUNE
1
TUNE
48V LINK
INPT
ZPAD
LINK MONO
MUTE
DIM TALK
MIC LINE INST
INST
MIC LINE INST
INST
MAIN
DIG
ALT
1
2
TUNE
123456
MBOX STUDIO
TUNE
48V LINK
INPT
ZPAD
LINK MONO
MUTE
DIM TALK
MIC LINE INST
INST
MAIN
DIG
ALT
3
Loading ...
Loading ...
Loading ...