Chamberlain B6713T User Manual

Loading ...

Without a properly installed safety reversal system, persons (particularly small children) could be SERIOUSLY

INJURED or KILLED by a closing garage door.

 Incorrect adjustment of garage door travel limits will interfere with proper operation of safety rreversal

system.

 After ANY adjustments are made, the safety reversal system MUST be tested. Door MUST reverse on contact

with 1-1/2” (3.8 cm) high object (or 2x4 laid at) on oor.

While programming the travel, the UP and DOWN buttons can be used to move the door as needed. The Safety

Reversing Sensors will be disconnected during the Program the Travel process. During the Automatic Force

Setup the door will automatically open and close.

Press and hold the Adjustment

Button until the UP Button begins to

ash and/or a beep is heard.

The Safety Reversing Sensors will be

disconnected during the Program the

Travel process.

3 Once the door is in the desired

UP position press and release the

Adjustment Button. The garage door

opener lights will ash twice and the

DOWN Button will begin to ash.

Press and hold the UP

Button until the door is in

thedesired UP position.

5 Once the door is in the desired DOWN position press and

release the Adjustment Button. The garage door opener

lights will ash twice. Program the Travel is now complete.

If the garage door opener lights ash 5 times, then

programming has timed out and the Travel Limits have not

been set. Please restart the Program the Travel process.

4 Press and hold the

DOWN button until the

door is in the desired

DOWN position.

2 - Automatic Force Set Up

Once both the up and down positions have been manually set, the Safety Reversing Sensors will reconnect and

become operational. Then, the opener will enter a force-sensing operation by automatically moving the door

open and close. The garage door opener will sound an audible and visual alert before automatically opening

and closing the door. The garage door opener will beep three times, conrming that the Automatic Force Setup

completed successfully. Adjustment is complete.

If you hear one long beep after the door attempts to move, then the Automatic Force Set Up has not completed

successfully. Please start over at step 1 of Program the Travel.

WARNING

Adjustment

1 - Program the Travel

Loading ...

Chamberlain B6713T Smart Advanced Corner LED Lighting-myQ Smartphone Controlled-Ultra Quiet, Strong Belt Drive & MAX Lifting Power, Blue Garage Door Opener