Loading ...
Loading ...
Loading ...
- 17 -
STARTING
Before starting, refer to your engine manual for proper starting procedures for your
engine type.
1.In a well ventilated outdoor area add fresh, high quality, unleaded gasoline with a
pump octane rating of 86 or higher, Do not overfill. Wipe up spilled fuel before
starting the engine. Refer to Engine Owners Manual for correct procedure.
2.Check engine oil level. See Engine Owners Manual for correct procedure.
There will be a slight amount of oil in the engine from factory
testing.
3. Verify the filter screen is in water inlet of pump.
Cone side faces out.
4. Connect water source to pump inlet.
Water source must provide a minimum of 5 gallons per minute at
20 p.s.i.
5. Connect high pressure hose to pump outlet.
6. If applying a chemical or cleaning solution, see How To Apply Chemicals/
Cleaning Solvents in Operation section of this manual.
7. Turn water source on.
Failure to do so could cause damage to the pump.
8. Start engine. See Engine Owners Manual for correct procedure.
If the engine does not start after two pulls, pull the
trigger to relieve the pressure.
9. Depress trigger on gun to start water flow.
Stand on a stable surface and grip gun/spray wand firmly with
both hands. Expect the gun to kick when triggered.
10. Release trigger to stop water flow.
11. Adjust spray for the task being performed by changing quick connect nozzle.
Loading ...
Loading ...
Loading ...