Loading ...
Loading ...
Loading ...
16
Note
• WPS is not a standard feature on all routers. If your
router does not have WPS then use Standard Wi-Fi
Setup.
• Press the PF (Wi-Fi Setup) button once if you want
to exit the WPS mode or it will automatically exit
after 2 minutes.
6.2 AirPlay setup
Use AirPlay to set up the Wi-Fi connection of iOS
device (iOS7 or later) and Soundbar.
1 Press and hold PF (Wi-Fi Setup) button
located at the back cabinet for 8 sec to
trigger the Wi-Fi connection.
2 Wait until the Wi-Fi light indicator turns from
a fast blink to a slow pulse. A slow pulse
indicates that the speaker is entering the Wi-
Fi setup mode.
3 On your iOS device go to: Settings > Wi-Fi >
select network [Play-Fi device (xxxxxx)]
iOS Wi-Fi set up by AIRPLAY
Settings Wi-Fi
Wi-Fi
Networks
SET UP NEW AIRPLAY SPEAKER…
Play-Fi DeviceXXXXXXXX
4. Soundbar will be automatically recognized
as Airplay device. Tap on [Set up new Air-Play
speaker].
5. Tap on [Show Other Networks…] and select
your home network to which you want
soundbar to connect.
6. After a successful Wi-Fi connection, the
Wi-Fi light indicator stops pulsing and stays
on. After setting up this product on your
Wi-Fi network, you can control it from any
smartphone or tablet on the same network.
6.3 DTS Play-Fi app setup
(For iOS and Android version)
By connecting this unit and mobile phones,
tablets (such as iPad, iPhone, iPod touch, Android
phones, etc.) to the same Wi-Fi network, you can
then use the DTS Play-Fi to control the soundbar
to listen to audio les.
1. Connect your phone or tablet to the same
Wi-Fi network that you want to connect your
soundbar.
2. Download and install the DTS Play-Fi on a
phone or tablet.
Play-Fi
• Make sure your router is turned on and
working properly.
3 Press and hold PF (Wi-Fi Setup) button
located at the back cabinet for 8 sec to
trigger the Wi-Fi connection.
• Until the speaker make a second tone and
then release the button.
4 Wait until the Wi-Fi light indicator on the back
cabinet goes from a fast blink to a slow pulse.
When it begins pulsing slowly, it indicates that
the speaker is entering the Wi-Fi setup mode.
5 Launch the DTS Play-Fi. Follow the
instructions in the App to connect this
product to your Wi-Fi network.
6 After a successful Wi-Fi connection, the Wi-Fi
light indicator stops pulsing and stays on. After
setting up this product on your Wi-Fi network,
you can control it from any smartphone or
tablet on the same network.
• When using the app to play music, the
display panel will show PLAY-FI.
7 After connection, you can change the device
name. There are several names to choose
from or create your own by choosing Custom
Name at the end of the name list. Otherwise,
it follows the default name.
8 After connection, this product may perform
a software update. Upgrade to the latest
software when it is your rst time set up. The
software upgrade may take several minutes. Do
not unplug your speaker, turn o your device,
or leave the network during the update.
Loading ...
Loading ...
Loading ...