Loading ...
Loading ...
Loading ...
– 14 – – 15 –
EN
EN
9.5 Shutdown Timer
9 . Operating Instructions
9.4 Fan Modes
The fan is equipped with three modes of operation. Each
mode can operate at each of the three speeds available.
The active mode is identied by the colour of the mode
indicator (18).
The fan retains the mode that was active at the time
it was switched o and starts up in this mode.
The fan mode is managed using the remote control
ONLY; see 10.3 Mode Selection.
9 . Operating Instructions
Mode Behaviour Indicator colour
Normal The fan maintains a constant airow
using the chosen speed setting.
Red
Natural The fan cycles between each of the
speed settings that are equal to or
lower than the active setting,
including o. Each cycle lasts
approximately 40 seconds.
Green
Sleep As in Natural mode, but the highest
available fan speed is reduced by
one step every 30 minutes until the
low speed cycle is maintained.
O
Timer period (min) Illuminated indicators Control panel labels
30 (25) 0.5H
60 (26) 1H
90 (25)(26) 0.5H + 1H
120 (27) 2H
150 (25)(27) 0.5H + 2H
180 (26)(27) 1H + 2H
210 (25)(26)(27) 0.5H + 1H + 2H
240 (28) 4H
270 (25)(28) 0.5H + 4H
300 (26)(28) 1H + 4H
330 (25)(26)(28) 0.5H + 1H + 4H
360 (27)(28) 2H + 4H
390 (25)(27)(28) 0.5H + 2H + 4H
420 (26)(27)(28) 1H + 2H + 4H
450 (25)(26)(27)(28) 0.5H + 1H + 2H + 4H
The fan is equipped with a timer that automatically
switches the device o after the congured period.
Shutdown occurs regardless of mode or speed.
The time remaining can be calculated by adding the
values of the illuminated indicators (25) (26) (27) (28) on
the control panel.
As time elapses, the indicators change as appropriate to
indicate the remaining time.
Important: The timer is cancelled if the fan is
switched o before the chosen period has elapsed.
The fan mode is set using the remote control ONLY;
see 10.4 Setting the Timer.
The timer period is indicated as follows:
Loading ...
Loading ...
Loading ...