Loading ...
Loading ...
Loading ...
– 11 –
EN
7. Assembly Instructions7. Assembly Instructions
Important: Read and understand all the safety
instructions listed in this manual before attempting
to assemble or install the product.
1. Loosen and remove the rear grille nut (12).
2. Place the rear grille (C) onto the fan bolt (14) so that the
handle loop (8) is positioned upwards at the rear and
the lower fan head pin (13) sits within the narrow slot.
3. Replace and tighten the rear grille nut and remove
the protective tubing from the fan bolt.
4. Slide the blade assembly (D) onto the fan bolt so that
the open face is directed to the rear of the fan.
Important: Ensure that the attened edge of the bolt
is inserted correctly through the blade assembly.
5. Screw the blade nut (F) securely onto the fan bolt.
Important: Rotate the blade nut anticlockwise to
tighten it. DO NOT overtighten the nut.
– 10 –
EN
6. Pass the grille cap (E) pin through the centre-most
opening of the front grille so that it sits within the
sunken area and x it in place with the 3 x 5mm
screw (J).
7. Remove the grille safety screw (15) from the front grille
(B) and pull the grille clips (6) outwards to open them.
The grille safety screw is located at the lowest
position on the front grille.
8. Align the grille safety screw holes at the bottom of the
grill frame and hook the upper clip (7) over the top of
the rear grille frame.
9. Use the grille safety screw to attach the front and rear
grilles together and push the grille clips inwards to
hold them in place.
(E)
Fig. 6
Fig. 7
Fig. 5
Fig. 1
Fig. 2
Fig. 3
(6)
(B)
(J)
Fig. 9
Fig. 8
(15)
(12)
(14)
(C)
(13)
(F)
Fig. 4
(D)
(8)
Loading ...
Loading ...
Loading ...