Loading ...
Loading ...
Loading ...
CARBURETOR ADJUSTMENTS
,i_ WARNING: If any adjustments are
made to the engine while the engine is
running (e.g. carburetor), keep clear of all
moving parts. Be careful of heated
surfaces and muffler.
Minor carburetor adjustments may be required
to compensate for differences in fuel,
temperature, altitude and load. To adjust
carburetor, refer to the separate engine manual
packed with your mower.
NOTE: A dirty air cleaner will cause an engine to
run rough. Be certain air cleaner is clean and
attached to the carburetor before adjusting
carburetor.
SECTION 8: LUBRICATION
Lube.
Lube
\
Lube
Left Rear
Wheel
Lube
Figure 16
ENGINE
Refer to the engine manual for lubrication
instructions.
WHEELS
Lubricate the wheels and bearings at least once a
season with light oil or engine oil. Also if the wheels
are removed for any reason, lubricate the surface of
the axle bolt and the inner surface of the wheel with
light oil. See Figure 16.
PIVOT POINTS
Lubricate the pivot points on the blade control
handle, brake cable and the cutting height
adjustment lever with light oil at least once a
season. See Figure 16.
SHAFT
Figure 17
Lubricate the two bearings and under the
compression spring on the shaft with light oil
frequently during the season. See Figure 17.
CUTTING HEAD BEARINGS
The two ball bearings in the cutting head are
lubricated and sealed at the factory and require no
lubrication. Lubricate all other moving parts with
engine oil.
10
Loading ...
Loading ...
Loading ...