Loading ...
Loading ...
Loading ...
Security menu
Miscellaneous Security Settings menu
Use To
Login Restrictions
Login Failures
Failure Time Frame
Lockout Time
Panel Login Timeout
Remote Login Timeout
Limit the number and time frames of failed login attempts from the printer
control panel before all users are locked out.
Notes:
• Login Failures
specifies
the number of failed login attempts before users
are locked out. Settings range from 1–10. 3 attempts is the factory default
setting.
• Failure Time Frame
specifies
the time frame during which failed login
attempts can be made before users are locked out. Settings range from
1–60 minutes. 5 minutes is the factory default setting.
• Lockout Time
specifies
how long users are locked out after exceeding
the login failures limit. Settings range from 1–60 minutes. 5 minutes is the
factory default setting. 1 indicates the scanner does not impose a lockout
time.
• Panel Login Timeout specifies how long the scanner remains idle on the
home screen before automatically logging the user o. Settings range
from 1–900 seconds. 30 seconds is the factory default setting.
• Remote Login Timeout specifies how long a remote interface remains
idle before automatically logging the user o. Settings range from 1–120
minutes. 10 minutes is the factory default setting.
Minimum PIN Length
1–16
Limit the digit length of the PIN.
Note: 4 is the factory default setting.
Confidential Print menu
Use To
Max Invalid PIN
O
2–10
Limit the number of times an invalid PIN can be entered.
Notes:
• This menu appears only when a formatted, non-defective printer hard disk is
installed.
• Once the limit is reached, the print jobs for that user name and PIN are deleted.
Confidential Job Expiration
O
1 hour
4 hours
24 hours
1 week
Limit the amount of time a confidential print job stays in the printer before it is deleted.
Notes:
• If the “Confidential Job Expiration” setting is changed while confidential print
jobs reside in the printer RAM or printer hard disk, then the expiration time for
those print jobs does not change to the new default value.
• If the printer is turned o, then all confidential jobs held in the printer RAM are
deleted.
Note: O is the factory default setting.
Understanding the printer menus 149
Loading ...
Loading ...
Loading ...