Loading ...
Loading ...
Loading ...
40
ENGLISH
a
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
thesesymbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
seriousinjury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
seriousinjury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderateinjury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
propertydamage.
Denotes risk of electricshock.
Denotes risk offire.
EC-Declaration of Conformity
Machinery Directive
o
Cordless Small Angle Grinder
DCG409
DEWALT declares that these products described under Technical
Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-3:2011
+A2:2013 +A11:2014 +A12:2014 +A13:2015
.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact
DEWALT at
the following address or refer to the back of themanual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
DEWALT.
Markus Rompel
Vice-President Engineering, PTE-Europe
DEWALT, Richard-Klinger-Straße 11,
65510, Idstein, Germany
20.11.2020
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in
DEWALT
EN60745 and may be used to compare one
tool with another. It may be used for a preliminary assessment
ofexposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total workingperiod.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total workingperiod.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of workpatterns.
DCG409
Voltage V
DC
18
Type 1
Battery type Li-Ion
Max. Power Output W 1647
Rated speed min
-1
9000
Wheel diameter mm 125
Wheel thickness (max) mm 6
Spindle diameter M14
Spindle length mm 21.5
Weight (without battery pack) kg 1.81
Noise values and/or vibration values (triax vector sum) according to
EN60745-2-3:
L
PA
(emission sound pressure level) dB(A) 83
L
WA
(sound power level) dB(A) 94
K (uncertainty for the given sound level) dB(A) 3
Surface grinding
Vibration emission value a
h,AG
= m/s
2
8.3
Uncertainty K = m/s
2
1.5
Disc sanding
Vibration emission value a
h,DS
= m/s
2
2.6
Uncertainty K = m/s
2
1.5
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough
product development and innovation make DEWALT one of the
most reliable partners for professional power toolusers.
Technical Data
PADDLE SWITCH GRINDER
DCG409
Loading ...
Loading ...
Loading ...