Loading ...
Loading ...
Loading ...
en Troubleshooting
20
4.
Clean the wire rack with stainless steel cleaner or in
the dishwasher.
Use steel wool or oven cleaner to remove very
heavy soiling.
5.
Dry with a soft cloth.
13.7 Cleaning the door seal
ATTENTION!
Incorrect cleaning may damage the door seal.
▶ Do not use metal scrapers or glass scrapers for
cleaning.
▶ Do not use abrasive cleaning agents.
1.
Read the information on cleaning products.
→Page18
2.
Clean the door seal with hot soapy water and a soft
dish cloth.
3.
Dry with a soft cloth.
13.8 Drying the cooking compartment by
hand
WARNING‒Risk of burns!
The appliance will become hot during operation.
▶ Allow the appliance to cool down before cleaning it.
1.
Remove any food remnants from the cooking com-
partment.
2.
Dry the cooking compartment with a soft cloth.
3.
Leave the appliance door open until the cooking
compartment has dried completely.
13.9 Cleaning aid
The cleaning aid is a quick alternative for occasionally
cleaning the cooking compartment. The cleaning aid
softens dirt by vaporising the soapy water. The dirt can
then be removed more easily.
Setting the cleaning aid
1.
Add a few drops of washing-up liquid to a cup of
water.
2.
Place a spoon in the cup to prevent delayed boiling.
3.
Place the cup in the centre of the cooking compart-
ment.
4.
Set the microwave output to 600W.
5.
Set the cooking time to 5minutes.
6.
Start the microwave.
7.
Once the cooking time has elapsed, leave the doors
closed for an additional threeminutes.
8.
Wipe out the cooking compartment with a soft cloth.
9.
Leave the cooking compartment to dry with the door
open.
14 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING‒Risk of injury!
Improper repairs are dangerous.
▶ Repairs to the appliance should only be carried out
by trained specialist staff.
▶ If the appliance is defective, call Customer Service.
WARNING‒Risk of electric shock!
Incorrect repairs are dangerous.
▶ Repairs to the appliance should only be carried out
by trained specialist staff.
▶ Only use genuine spare parts when repairing the
appliance.
▶ If the power cord of this appliance is damaged, it
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.
14.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not
working.
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your kitchen or other appliances are working.
Malfunction
1.
Switch off the fuse in the fuse box.
2.
Switch the fuse back on after approx. 10seconds.
a If the fault was a one-off, the message disappears.
3.
If the message appears again, call the after-sales service. Please specify the exact error
message when calling.
→"Customer Service", Page36
Loading ...
Loading ...
Loading ...