Loading ...
Loading ...
Loading ...
User Guide 138
Configuring DDM (Only for Certain Devices) DDM Configuration
â– Configuring the Tx Power Threshold
Figure 2-6 Configure Tx Power Threshold
Follow these steps to configure DDM‘s Tx power threshold:
1) In the TX Power table, select one or more SFP ports to configure Tx power threshold on
the SFP ports.
High Alarm Specify the high Tx power threshold for the alarm. When the operating parameter
rises above this value, action associated with the alarm will be taken. The valid
values are from 0 to 6.5535.
Low Alarm Specify the low Tx power threshold for the alarm. When the operating parameter
falls below this value, action associated with the alarm will be taken. The valid
values are from 0 to 6.5535.
High Warning Specify the high Tx power threshold for the warning. When the operating
parameter rises above this value, action associated with the warning will be taken.
The valid values are from 0 to 6.5535.
Low Warning Specify the low Tx power threshold for the warning. When the operating
parameter falls below this value, action associated with the warning will be taken.
The valid values are from 0 to 6.5535.
LAG Displays the LAG number which the port belongs to.
2) Click Apply.
Loading ...
Loading ...
Loading ...