Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/95697745-tl-sg3210xhp-m2/bg40c.png)
Configuring OAM (Only for Certain Devices) Ethernet OAM Configurations
User Guide 1007
2.2.3 Configuring Remote Failure Indication
Follow these steps to configure Remote Failure Indication:
Step 1 configure
Enter global configuration mode.
Step 2 interface {fastEthernet
port
| range fastEthernet
port-list
| gigabitEthernet
port
| range
gigabitEthernet
port-list
| ten-gigabitEthernet
port
| range ten-gigabitEthernet
port-list
}
Enter interface configuration mode.
Step 3 ethernet-oam remote-failure { dying-gasp | critical-event } notify { disable | enable }
Configure the Dying Gasp Notification and Critical Event Notification features on the port.
dying-gasp:
Enable Dying Gasp Notication, and if the switch detects an unrecoverable fault
on the network, such as power failure, occurs, it will send Information OAMPDU to notify the
peer.
critical-event:
Enable Critical Event Notification, and if the switch detects an unspecified
critical event occurs, it will send Information OAMPDU to notify the peer.
disable | enable:
Enable or disable notication to report the link events.
Step 4 show ethernet-oam configuration [ interface fastEthernet {
port
|
port-list
} |
interface
gigabitEthernet {
port
|
port-list
} | ten-gigabitEthernet {
port
|
port-list
}]
Verify the OAM configuration.
Step 5 end
Return to privileged EXEC mode.
Step 6 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to enable Dying Gasp and Critical Event on port 1/0/1:
Switch#configure
Switch(config)#interface gigabitEthernet 1/0/1
Switch(config-if)#ethernet-oam remote-failure dying-gasp notify enable
Switch(config-if)#ethernet-oam remote-failure critical-event notify enable
Switch(config-if)#show ethernet-oam configuration interface gigabitEthernet 1/0/1
Gi1/0/1
-----------------------------------------------------------
...
Dying Gasp : Enabled
Loading ...
Loading ...
Loading ...