Loading ...
Loading ...
Loading ...
Configuring DDM (Only for Certain Devices) DDM Configuration
User Guide 133
2
DDM Configuration
To complete DDM configuration, follow these steps:
1) Enable DDM on the SFP port and configure the shutdown condition.
2) Configure the specified value for warning or alarm threshold.
2.1 Using the GUI
2.1.1 Configuring DDM Globally
Choose the menu L2 FEATURES > Switching > DDM > DDM Config and select the desired
SFP port to load the following page.
Figure 2-1 Configure DDM Globally
Follow these steps to configure the DDM parameters on SFP ports:
1) In the Port Config section, select one or multiple SFP ports to configure DDM
parameters.
DDM Status Enable or disable DDM feature on the SFP port.
Shutdown Specify whether to shut down the port when the alarm threshold or warning
threshold is exceeded.
Alarm: Shut down the port when the alarm threshold is exceeded.
Warning: Shut down the port when the warning threshold is exceeded.
None: The port will not be shut down even if the alarm threshold or warning
threshold is exceeded. This is the default option.
LAG Displays the LAG number which the port belongs to.
2) Click Apply.
Loading ...
Loading ...
Loading ...