Loading ...
Loading ...
Loading ...
14
WARNING:
WEAR A DUST MASK IF BLOWING CREATES
DUST THAT MIGHT BE INHALED.
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Make sure the collection tank is empty before using as a blower. Clear all dirt and debris from the
hose and collection tank.
3. Remove the hose from the vacuum port.
4. Insert the larger end of the hose into the blower port on the back side of the powerhead (Fig. 2).
5. Choose the desired accessory and insert onto the end of the hose (Fig. 3).
6. Verify that the on/o switch is in the ‘O’ OFF position before plugging the power cord into the outlet.
Plug the power cord into the outlet (Fig. 4 & 5).
7. Before turning on the vacuum, rmly hold the loose end of the hose. Turn the motor on by ipping
the switch to the ‘I’ ON position (Fig. 6).
8. Once you have completed blowing, ip the on/o switch to the ‘O’ OFF position. Unplug the power
cord from the outlet (Fig. 7).
MAINTENANCE
1 2 43
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Disconnect the hose from the vacuum (Fig. 2).
3. Undo the latches and remove the powerhead from the collection tank (Fig. 3). Place power head on
a soft, clean surface upside down.
4. Clear all dirt or debris from the collection tank and hose into a proper waste container (Fig. 4).
5. Clean or replace the lters.
6. Check the hose, accessories, and power cord to verify that they have not been damaged.
7. Place the powerhead back on collection tank and secure latches.
EMPTYING THE COLLECTION TANK
WARNING:
ALWAYS DISCONNECT THE PLUG FROM
THE POWER OUTLET BEFORE REMOVING THE POWERHEAD FROM
COLLECTION TANK.
IMPORTANT! Clean or change the filter regularly for best performance. ALWAYS USE THE
REUSABLE CLOTH FILTER FOR DRY VACUUMING. If the machine is used without the reusable
cloth lter, the motor will burn out and the warranty will be voided. Always keep spare lters on hand.
Loading ...
Loading ...
Loading ...