GE - General Electric JGBS19BEH2CT GE gas range

User Manual - Page 14

For JGBS19BEH2CT.

PDF File Manual, 44 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Usingtheoven.
Toavoid possible bums, place the shelves in the desired position before you turn the oven on.
Before you begin...
The shelves ha_e stop-locks, so that when
placed correcfl)on the sheff supports
(A through E), the) will stop before
comiw,_ completely ()tit, and will not tilt.
_,\qmn I)lacinĀ°-, and removing, cookware,
pull the shelf out to the bump on the
shelf support.
Toremove a shelf, pull it toward you, tilt the
fl'ont end up and pull it out.
Toreplace, place the end of the shelf
(stoiMocEs) on the support, tilt up the
ti'ont and push the shelf in.
NOTE."Theshelf isnot desl)ned toslide out at the
specta/low shelf (R)position.
The oven has 5 shelf positions.
It also has aspecial low shelf
position (R)for extra large items,
such as a large turke_
Plastic items on the cooktop may
melt if left too close to the vent.
Vent appearance and location vary.
Oven Vent
"_mr oven is vented through ducts at the
rear of the range. Do not block these ducts
when cooking in the oven--it is important
that the flow tff hot air fl'om the oven
and fl'esh air to the oven brinier be
uninterrupted. Avoid touching the vent
openings or nearby surfaces during oven or
broiler operation--they Inay becoine hot.
!i>Handlesofpots and panson thecooktop may
becomehot if left tooclose to the vent
iJi::Donot leaveplastic or flammableitems on the
cooktop--they maymelt or i)nite if left too close
to the vent
_: Donot leaveclosedcontainerson the cooktop.
Thepressurein closedcontainersmay increase,
whichmay causethem toburst.
::Ji::Metal items will becomeveryhot if theyare left
onthe cooktop,and could causeburns.
Power Outage
CAUTION:Donotmakeany
attempt tooperate the electric ignition oven
during an electricalpower failure.
The oven or broiler cannot be lit dm_ing
a power fhilure. Gas will not flow mfless
the glow bar is hot.
If tile oven is in use when a power tidlm'e
occm_, the oven burner shuts off and
cannot be re-lit until power is restored. This
is because the flow of gas is automatically
stopped and will not resume when power
is restored until tile glow bar has reached
operating temperature.
Oven Light
Use the switch on the lower controlpanel to
turn the light on or off.
14
Loading ...
Loading ...
Loading ...