Loading ...
Loading ...
Loading ...
14
Cleaning of soft roller brush
1. Pull the roller brush pull ring outwards to pull the roller brush
directly;
2. Use clean water to clean the roller brush and install it back
to its original position;
Cleaning the brush cover
1. Press the roller brush cover release button and lift up to open the
cover;
2. Rinse with clean water and wipe the cover plate and install it
back in place;
NOTICE
1. After cleaning the cover, be sure to install it back to its original position to avoid the roller brush from working without protection;
2. In order not to affect the performance of the machine, it is recommended that you regularly maintain its parts;
NOTICE
1. Pay attention to the amount of waste when disassembling the waste water tank to avoid splashing of dirty water during the disassembly;
2. The filter element needs to be completely air-dried before use, so as not to cause odors and reduce filter performance;
3. When installing the recovery tank back to its original position, make sure that the filter element has been installed;
4. Please clean the optical flow sensor and light guide on the appliance regularly to avoid affecting the performance of the machine;
①
②
10. Use a cloth or wet paper towel to clean the surface of the
light guide on both sides of the filter element and install it back
in place;
Light
guide
surface
9. Use the cleaning brush to reach down into the cleaning pipe;
Loading ...
Loading ...