Loading ...
Loading ...
Loading ...
WARNING
1. If you do not use the machine for a long time, please make sure to charge it at least once a month to avoid serious damage to the
battery due to lack of power;
2. If the appliance is still charging after the normal charging time, please stop charging immediately, otherwise the battery may generate
heat, deformation or extreme thermal effects;
3. If you need to discard the appliance, please power off the appliance and remove the battery;
4. Please dispose of used batteries safely and properly, and do not throw them into fire, water, or soil;
5. If the battery leaks and touches your skin or clothing, please rinse with clean water to avoid skin discomfort. If you still feel unwell,
seek medical attention immediately.
10
Use of self-cleaning function
After you're done cleaning,put the host back to the base in time to ensure that the water in the water purification tank is sufficient.
Short press the self-cleaning button on the right side of the fuselage, the self-cleaning prompt on the screen lights up and the
self-cleaning starts. After the self-cleaning is over, the host continues to enter the charging base, and the air-drying roller
brush can be started through the APP control.
(The self-cleaning function can only be used when it is charged and the power is more than 20%)
How to reset and clear user data
Reset: Use the tool to press the reset button for 1 sec to restore the
factory settings of the appliance
Clear user data: In shutdown mode, press the and switch buttons
at the same time and hold for ≥3 seconds to enter the factory reset
state (after clearing the user data, it will automatically shut down)
Loading ...
Loading ...
Loading ...