Loading ...
Loading ...
Loading ...
13
Disassembly and cleaning of the waste water tank and cleaning of the optical flow sensor
1. Press down on the buckle of the waste water tank and
pull it out to disassemble the waste water;
2. Gently wipe the optical flow sensor on both sides of the
appliance body with a rag or wet paper towel;
Please turn off the appliance before cleaning. If you need to replace the parts, please use ROIDMI
designated parts to avoid damage to the product.
4. After rotating as shown in the figure, remove the protective cover
of the light guide column downwards;
Product cleaning
3. Take out the waste water tank and take out the upper cover
of the waste water tank and pour out the dirty water, then
take out the filter element upward and separate it from the
upper cover of the waste water tank;
8. Dump the garbage and clean the solid-liquid separator;
7. Take out the solid-liquid separator upwards;
5. Wash the filter element, the upper cover of the waste
water tank, and the protective cover of the light guide column
with clean water and air dry;
6. Install the filter element, the upper cover of the waste water
tank, and the protective cover of the light guide column back
to the original position;
Optical
flow
sensor
②Rotate
①Up
①Rotate
②Down
Loading ...
Loading ...
Loading ...