Loading ...
Loading ...
Loading ...
13
Remote start button
Once the dishwasher is connected to the home network,
press the remote start button
h to control the
dishwasher from your device.
If the dishwasher has still not logged into Home Connect,
access the Home Connect settings by pressing the
remote start button
h.
Follow the directions in the supplied Home Connect
leaflet.
Note: Your dishwasher is protected against unintentional
operation. If the appliance door remains open for more
than 4 seconds after pressing the Remote Start
button
h, the operation will be paused. Press the
Remote Start button h again and close the appliance
door to resume control. Also see section
Notes
▯ When the login process is complete, the Remote Start
button h goes out.
▯ To activate the remote control, press the Remote Start
button h.
▯ If the Home Connect Assistant was aborted during
start-up, press the Remote Start button h again.
▯ If the connection to the router fails, | flashes on the
display.
Wi-Fi without a connection to the Home
Connect server ƒ
Wi-Fi without a connecti on to the Home Connect server
You can use the Home Connect App to disconnect from
the Home Connect server.
The appliance is then locally connected to your mobile
device without any connection to the Home Connect
server.
Note: If you did not deactivate the connection to the
Home Connect server, check your Internet connection.
Remote diagnosis ~
Remote diagnosis
Customer Service can use Remote Customer Service~
to access your appliance if you contact them.
Notes
▯ You have to confirm Customer Service access on your
appliance.
▯ You can switch off Remote Customer Service ~ using
the On/Off switch ( or deactivate Customer Service
access in the Home Connect App.
Loading ...
Loading ...
Loading ...