Loading ...
Loading ...
Loading ...
Step
6Anti-Tip
Secure Precautions
R@k&rator Personal Injury/Property Damage Hazard
case tn”m The refi-igerator is much heavier at the top. To prevent
to sidepanel the refrigerator from tipping over you mus~
●Install awood block, the full width of the refrigera-
tor. Secure the block with wood screws penetrating
at least 3/4” into wall studs.
7
Step
Connect
Water
Supplj
When using 1/2” to 3/4” side panels, the front flange
of the case trim is attached to the side panel.
sOpen freezer door to access case trim.
●Drill hole in flange and drive screw through the
flange, into the side panel.
●Follow the same procedure for fresh food side.
—Side View
Stud
\ / /
—
—Side View
OR
If refrigerator is installed between cabinets with no
side panels or in acustom enclosure, install aspacer
block as shown.
●Open freezer door to access case trim.
●Drill hole in trim and drive screw through the trim
and into the spacer block.
●Follow the same procedure for fresh food side.
●Locate and bring copper tubing to front of cabinet.
●Turn water on to flush debris from line, run about
aquart of water through tubing into abucket, then
shut off water. \
1’
●Slip a1/4-1/4 union nut (provided) over both t--l IJ
ends of the copper tubing at the right front leg of ~
the refrigerator and couple the lines.
.Turn on water to check for leaks.
L.. !I
9
-—
Loading ...
Loading ...
Loading ...