Loading ...
Loading ...
Loading ...
3
Step
Install
Side
Panels
4
Step
Roll Unit
into Opening
Decorator side panels are required wherever the
sides of the refi-igerator will be exposed.
Side panel installation will be determined by the
design of the side panel you have previously chosen.
Side panels are normally set into place and fastened
to adjacent cabinetry or the back wall before rolling
unit into opening.
If you choose to use 1/4” side panels, they should be
fhstened to the refrigerator before setting refrigera-
tor into place. See Illustration A.
If you choose to use 1/2” to 3/4” side panels, see
Illustrations Band C.
1/4 Side Panels –Insert end of side panel
into case trim. Fasten with velcro strips
included.
Illustration C
l/Z”to 3/4 Side Panels –Recessed front
edge of side panel. Fasten to adjacent
cabinet.
If acustom refi-igerator enclosure has been made
and installed, or if you are installing between pantry
and oven cabinets, side panels are not required.
Check finished hole size as determined by previous
instructions.
To cover entire side of the refrigerator: Cut panels
84” high, 23-Y16 to 24-3/4” wide. Height and width
of the panels will vary depending on installation
method.
Make sure side panels are installed plumb.
See Custom Options Guide for more details.
1/2 to 3/4” Side Panels –Leading edge of
side panel is flush with cabinet front. Fasten
to the back wall using acleat.
Cabinet’
1/2to 3/4 Side Panels –Leading edge of
side panel is routed 1/4 deep, 1-1/2 wide.
Fasten to adjacent cabinet.
With cardboard protective pad in position, use a
handtruck to roll refrigerator into the front of the
location cutout.
5
Step
Level
fiftigerator
All models have 4point leveling. The front is
supported by leveling legs, the back is supported by
rear wheels.
●To level the back of the unit, turn the 7/16” hex Hex Nut
nut located above the front wheels, RearWh
●For front leveling, use the 1-1/2” open-end wrench
(provided).
.Turn hex nut or front leveling leg to raise or lower
the refrigerator.
.Adjust carefully, the refrigerator should be level
and plumb with cabinetry, and should align with
toekick height.
8
Loading ...
Loading ...
Loading ...