Loading ...
Loading ...
Loading ...
installation 9
Lift the door while adjusting the washer.To
raise the door, rotate washer clockwise (when
viewed from the bottom). To lower door, rotate hinge.
washer counter-clockwise (when viewed from the ........................
bottom).
Washer
Raising/Lowering Door
Re-tighten the screw (where applicable), ensuring
it is between the spokes of the washer. Screw
will not be tight, just insert until it is flush with the
hinge.
Re,tighten Screw
To adjust the flipper mullion:
1 Loosen the screw located on the flipper mullion
_ F!ipper
Mulliiin
i
i
Adjusting Flipper MuBion Screw
2Adjust flipper mullion height. For proper
connection with the flipper mullion guide, there
should be a separation about the thickness of a
coin (0.060 inches, or 1.5 mm) between the guide
and flipper mullion.
Screw (where applicable)
3
Adjusting Flipper Mullion Height
Re-tighten screw.
NOTE
If after adjusting doors higher the door makes a
popping/clicking sound, remove screw and replace
with the longer one supplied in the handle package.
Loading ...
Loading ...
Loading ...