Loading ...
Loading ...
Loading ...
installing Door andles 13
Door Handle
1 Remove handles from
protective packaging.
2Position fresh food handle
end caps (A) over upper and
lower pre-installed shoulder
bolts (B) that are fastened
into door, ensuring the holes
for the set screws are facing
towards the opposite door.
3 While holding handle firmly
against door, fasten upper
and lower Allen set screws
(C) with supplied Allen
wrench.
Repeat steps 2 and 3 to
install opposite handle,
Ensure the holes for the set
screws are facing towards the
first door.
5 Position freezer handle end
caps over left and right pre-
installed shoulder bolts that
are fastened to the drawer,
ensuring the holes for the set
screws are facing down.
6 While holding handle firmly
against drawer, fasten left and
right Allen set screws (C) with
supplied Allen wrench.
Mounting Refrigerator Handles
_End _
Cap
NOTE
Mounting Freezer Handle
To ensure that handles are flush with doors/drawer, make sure that set screws are completely tightened.
CAUTION
Wear gloves and safety goggles. Use extrerr_ CAUTION when installing these handles.
Loading ...
Loading ...
Loading ...