Loading ...
Loading ...
Loading ...
Action Yes No
a Using the Print Quality Test Pages, measure the distance
between the repeating defects on the aected color page.
b Check if the repeating defects match any of the following
measurements:
Imaging kit
• 94.20 mm (3.71 in.)
• 29.80 mm (1.17 in.)
• 23.20 mm (0.91 in.)
Developer unit
• 43.90 mm (1.73 in.)
• 45.50 mm (1.79 in.)
Transfer module
• 37.70 mm (1.48 in.)
• 78.50 mm (3.09 in.)
• 55 mm (2.17 in.)
Fuser
• 79.80 mm (3.14 in.)
• 94.30 mm (3.71 in.)
Do the repeating defects match any of the measurements?
Take note of the
distance, and then
contact
customer
support.
Take note of the
distance, and then
contact
customer
support.
The printer is not responding
Action Yes No
Step 1
Check if the power cord is connected to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or
electrical shock, connect the power cord to an appropriately
rated and properly grounded electrical outlet that is near the
product and easily accessible.
Is the printer responding?
The problem is
solved.
Go to step 2.
Step 2
Check if the electrical outlet is turned o by a switch or breaker.
Is the electrical outlet turned o by a switch or breaker?
Turn on the switch or
reset the breaker.
Go to step 3.
Step 3
Check if the printer is on.
Is the printer on?
Go to step 4. Turn on the printer.
Troubleshooting 179
Loading ...
Loading ...
Loading ...