Loading ...
Loading ...
Loading ...
10 11
SETTING THE CLOCK AND DELAY BREW TIME
To Set the Clock:
1. Plug the power cord into a standard
electrical outlet. The clock will flash
on the control panel to indicate that
the time has not been set yet.
2. Press and hold the HOUR and MINUTE
buttons until you reach the current
time. The AM or PM indicator will light
at the bottom of the display
( Figures 1 and 2) .
NOTE: Pressing any button before setting
the clock will cause the clock to start
keeping time from 12:00 a.m. You must
set the clock if you want to use the Delay
Brew feature.
To Set the Delay Brew Time:
While the display is in the clock mode,
simply press the SET DELAY button
(Figure 3) and, while the DELAY BREW time
is flashing , set the brew time by pressing
the HOUR and MINUTE buttons. The AM or
PM indicator will light at the bottom of the
clock display. (Figure 4)
Within a few seconds the display will
change to the current time.
The Delay Brew Time is now set!
NOTE: To activate the DELAY BREW cycle,
see the “Brewing Coffee Later” section.
To check the programmed time, push
the SET DELAY button. The display will
show the time you have programmed the
coffee to brew. If you press the SET DELAY
button again or wait a few seconds, the
display will switch back .
Figure 1
Figure 2
Figure 3
Figure 4
PREPARING FOR USE
Selecting and Measuring Ground Coffee:
For best results, use a level tablespoon for ground coffee
measurement.
Make sure you use medium grind coffee for a perfect brew.
A. Suggested Coffee Measurement Chart:
To Brew Ground Coffee
1 level tablespoon
(tbsp) = 5 gr./0.17 oz.
1 cup = 5 fl. oz. of
brewed coffee
Use more or less coffee
to suit your taste.
12 Cups 9 tbsp.
10 Cups 7.5 tbsp.
8 Cups 6.5 tbsp.
6 Cups 4.5 tbsp.
4 Cups 3 tbsp.
BVMC-EHX Series_BVMC-JPX Series_23ESM1.indd 10-11BVMC-EHX Series_BVMC-JPX Series_23ESM1.indd 10-11 2023/6/21 08:242023/6/21 08:24
Loading ...
Loading ...
Loading ...