Loading ...
Loading ...
Loading ...
8
care and cleaning
Unplugandswitchoffyourwafemakerandallowittofullycooldownbefore
cleaningit.Neverimmersethemainbody,cordsetorpluginwaterorliquidofany
kind.
Neverusesteelwool,scouringpads,abrasivecleanersormetallicutensilstoclean
yourwafemaker.
1. Wipe the wafe plates with absorbent paper or a soft damp cloth.
2. Clean the outside of your wafe maker with a soft damp cloth. The cover can be
polished with a soft dry cloth.
3. Remove one plate at a time. Press the corresponding release button and lift the plate
away from the heating element.
4. Immerse the plates in warm, soapy water. Rinse with clean water. Wipe dry with a
soft cloth.
Note: We recommend that you wash the plates by hand only, in order to preserve the
DuraCeramic
™
coating.
5. Replace one plate at a time. Guide the positioning tabs into the slots located on
the hinge side of the wafe maker. Press the plate gently to lock in place onto the
heating element.
Note: The bottom plate is slightly shallower than the top plate. Each plate will only t
into the appropriate position on the wafe maker (bottom or top).
Storage
1. Allow the wafe maker to cool fully before storing and ensure that the appliance is
clean.
2. Lock the wafe plates together by clipping the latch shut. Wrap the cord in the cord
storage area.
3. Store the appliance upright. Alternatively, on a at, level surface, away from the edge
and where it cannot be easily knocked over.
Loading ...
Loading ...
Loading ...