Tripp Lite BP72RT NEW Eaton Tripp Lite SmartOnline Series Rack Tower UPS Advanced User Guide

Loading ...

Tripp Lite by Eaton SmartOnline Series User Guide 614-21325—Rev 01 9

22..33 CCoonnnneeccttiinngg tthhee IInntteerrnnaall BBaatttteerryy

NOTE 1 Place the UPS on a flat, stable surface in its final location.

NOTE 2 Always keep 150 mm of free space behind the UPS rear panel.

Figure 6. Internal Battery Connection

1. Remove the center cover of the front panel.

2. Push left cover toward to right direction.

3. Open the left side of the front panel.

NOTE A ribbon cable connects the LCD control panel to the UPS. Do not pull on the cable or

disconnect it.

A small amount of arcing may occur when connecting the internal batteries. This is normal and will not harm

personnel. Connect the cables quickly and firmly.

4. Connect the two battery connectors together.

5. Put back the front panel, then clip the center cover.

22..33..11 UUPPSS TToowweerr IInnssttaallllaattiioonn

Tip If you ordered other UPS accessories, refer to specific user manuals to check the tower installation with

the UPS.

To install the cabinet:

1. Place the UPS on a flat, stable surface in its final location.

2. Always keep 6" or 150 mm of free space behind the UPS rear panel for ventilation.

Connecting the Internal Battery

Loading ...

Tripp Lite BP72RT NEW series 72V Extended Battery Module EBM