Loading ...
Loading ...
Loading ...
16
Connecting an antenna
To connect your TV to an antenna, plug one end of a coax cable (not included) into your TV’s ANT/CABLE port,
and the other end into your device’s ANT OUT port (see Table 1). For the best picture and color, make sure
your cables are connected securely.
You’ll need to scan for channels after setting your antenna up. To do that:
1. Turn your TV on and press the home button on your remote
2. Select the Antenna tile, or open Settings > Antenna and inputs > Antenna > Channel scan
3. Follow the on-screen instructions, then select Scan for channels
4. Wait while your TV scans for channels – this can take several minutes
5. When the channel scan is finished, you’ll see the number of channels that were added
6. Click Continue
If you’re using an antenna with a twin-lead cable, you may need a 300-75 Ohm adapter (not included) to be
able to use your twin-lead cable with your TV. If you’re using multiple antennas, you may also need a combiner
(not included).
Connecting an HDMI device
To connect an HDMI device, plug one end of an HDMI cable (not included) into 1 of your TV’s 3 HDMI ports
(see Table 1 below). Then plug the other end into your device.
Connecting a device with a composite video cable
To connect to a device using a composite video cable, plug the red, white, and yellow ends of the composite
video cable (not included) into your TV’s AV IN port (see Table 1). Then plug the other end into your device.
Connecting headphones
To connect headphones (not included) to your TV, plug them into your TV’s HEADPHONE port (see Table 1).
The sound from the built-in speakers of the TV will be disabled when the headphones are connected.
Connecting speakers or other sound systems
To connect speakers or other sound systems to your TV, plug one end of an audio cable (not included) into
your TV’s HDMI-eARC port . Then plug the other end into your device. The sound from the built-in speakers of
the TV will be disabled when the HDMI-eARC port is connected to a speaker or other sound system, and that
device is turned ON.
If you’re using a digital audio cable (not included), plug one end of the cable into your TV’s DIGITAL AUDIO
Loading ...
Loading ...
Loading ...