Masterforce 7569 Ultra Compact 20-Volt Brushless Cordless 1/2" Drill & 1/4" Impact Driver Combo Kit

Operator's Manual - Page 46

For 7569.

PDF File Manual, 68 pages, Read Online | Download pdf file

7569 photo
Loading ...
Loading ...
Loading ...
Page 9
CHARGING A HOT
BATTERY PACK
If the battery pack is above the normal
temperature range, the red LED will
illuminate and the green LED will be off.
When the battery pack cools down to
approximately 104°F (40°C), the charger will
automatically begin charging.
CHARGING A COLD
BATTERY PACK
If the battery pack is below the normal
temperature range, the red LED will
illuminate and the green LED will be off.
When the battery warms to a temperature
of 41°F (5°C), the charger will automatically
begin charging.
DEFECTIVE BATTERY
If the charger detects a problem, the red
LED will begin flashing and the green LED
will be off.
1. If registering as defective, remove and
reinsert the battery pack in the charger. If
the LED status reads “defective” a second
time, try to charge a different battery pack.
2. If a different battery pack charges
normally, dispose of the defective battery
pack (see Maintenance section).
3. If a different battery pack also indicates
“defective,” the charger may be defective.
OPERATION
BATTERY CHARGING
If the battery pack is within the normal
temperature range, the green LED will begin
flashing and the red LED will be off.
BATTERY FULL
After the battery is fully charged, the green
LED light on the charger will be on and the
red LED light will be off.
NOTICE: The battery pack will fully charge,
but will not overcharge, if left on the charger.
NOTICE: Charger may warm with several
continuous charge cycles. This is part of
the normal operation of the charge. Always
charge in a well-ventilated area.
Loading ...
Loading ...
Loading ...