Loading ...
Loading ...
Loading ...
Page 10
OPERATION
TO INSTALL THE BELT CLIP
(FIG. 2)
FIG. 2
Belt Clip
Screw
1. Align the rib of the clip with the hole on
the base of the impact driver.
2. Insert the screw and tighten the screw
securely with a screwdriver (not included).
The belt clip can be positioned on either
side of the tool.
TO REMOVE THE BELT CLIP
(FIG. 2)
1. Use a screwdriver (not included) to
loosen the screw that attaches the belt clip
to the impact driver.
2. Remove the screw and the belt clip.
Keep them in a safe place for future use.
TO STORE THE BIT (FIG. 3)
FIG. 3
Bit
Bit Holder
Your impact driver is equipped with a bit
holder on the heel of the tool. After using
the bit, you can insert the bit into the bit
holder for convenient storage.
VARIABLE-SPEED TRIGGER
SWITCH (FIG. 4)
FIG. 4
Variable-Speed
Trigger Switch
1. To turn the impact driver on, press the
trigger switch.
2. To turn the impact driver off, release the
trigger switch.
3. The variable-speed trigger switch
delivers higher speed with increased trigger
pressure and lower speed with decreased
trigger pressure.
ELECTRIC BRAKE
To stop the impact driver, release the
trigger switch and allow the chuck to come
to a complete stop. The electric brake
quickly stops the chuck from rotating. This
feature engages automatically when you
release the trigger switch.
Loading ...
Loading ...
Loading ...