Loading ...
Loading ...
Loading ...
Page 2
SAFETY SYMBOLS
Some of these following symbols may be used on this tool. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the tool better and
more safely.
Symbol
Name
Designation / Explanation
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
∿
Alternating current Type of current
�
Direct current Type or characteristic of current
n
o
No-load speed Rotational speed at no load
lbs Pounds Weight
Class II construction Double insulated construction
.../min Per minute
Revolutions, strokes, surface speed
orbits, etc., per minute
Wear safety goggles
WARNING:
The operation of any
power tool can result in foreign objects being
thrown into your eyes, which can result
in severe eye damage. Before beginning
power tool operation, always wear safety
goggles or safety glasses with side shields
and a full-face shield when needed. We
recommend a Wide Vision Safety Mask
for use over eyeglasses or standard safety
glasses with side shields. Always use eye
protection which is marked to comply with
ANSI Z87.1.
BFP Backfeed protection
It is a protection required by the safety
regulation, which function is to avoid the
current flowing from the battery to the
charger to bring safety risks.
UL mark
This symbol designates that this tool is
listed by Underwriters Laboratories.
WARNING:
To ensure safety and reliability, all repairs should be performed by a
qualified service technician.
Loading ...
Loading ...
Loading ...