Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/59865680-7569/bgb.png)
Page 10
OPERATION
TO INSTALL THE BELT CLIP
(FIG. 2)
1. Align the rib of the clip with the hole on
the base of the drill/driver.
2. Insert the screw and tighten the screw
securely with a screwdriver (not included).
The belt clip can be positioned on either
side of the tool.
TO REMOVE THE BELT CLIP
(FIG. 2)
1. Use a screwdriver (not included) to
loosen the screw that attaches the belt clip
to the drill/driver.
2. Remove the screw and the belt clip.
Keep them in a safe place for future use.
FIG. 2
TO STORE THE BIT (FIG. 3)
FIG. 3
Your drill/driver is equipped with a bit
holder on the heel of the tool. After using
the bit, you can insert the bit into the bit
holder for convenient storage.
LED WORKLIGHT (FIG. 4)
FIG. 4
The LED worklight, located on the base
of the drill/driver, will illuminate when the
trigger switch is depressed before the drill/
driver is running. This provides additional
light on the surface of the workpiece. The
light will automatically turn off within 10
seconds after releasing the trigger.
VARIABLE-SPEED TRIGGER
SWITCH (FIG. 5)
FIG. 5
Variable-Speed
Trigger Switch
Belt Clip
Screw
Bit Holder
Bit
LED Worklight
Loading ...
Loading ...
Loading ...