Loading ...
Loading ...
Loading ...
Before using the wine cooler, remove all packaging materials including bottom
cushions and foam pads and tapes inside the wine cooler, tear off the
protective film on the door and the wine cooler body.
Installation Instructions
Placement
Install the wine cooler in a well-ventilated indoor place; the ground shall
be flat, and sturdy (rotate left or right to adjust the wheel for leveling if
unstable).
Keep away from heat and avoid direct sunlight. Do not place the wine cooler
in moist or watery places to prevent rust or reduction of the insulating effect.
The hot air from the side walls of the cooler shall be exhausted without restrictions, or
the compressor's power will increase and further increase power consumption. Thus
the distance between cooler and walls or neighboring furniture shall not be less than
4cm Wipe the wine cooler inside and outside with a warm moist rag (add a small
amount of detergent in the warm water and wipe clean with clean water at the end).
Please leave enough space to ensure easy opening .
Dimensions shown are for reference only.
The wine cooler shall stay still for half an hour before connecting 115V/60Hz
power when it is started for the first time.
The wine cooler shall run 2 to 3 hours before loading wine; the wine cooler
shall run for more than 4 hours in summer in advance considering that the
environmental temperature is high.
5
18.9inch
15.4inch
32.9inch
28.7inch
Loading ...
Loading ...
Loading ...