Loading ...
Loading ...
Loading ...
The treadmill has already been coated with "Silicone Oil" in advance. Silicone oil
is a non-volatile oil and by the time you receive should have permeated through
the belt. There will be no need to re-apply the oil under normal circumstances.
To maintain the belt, "Silicone Oil" may be re-applied once the resistance has
been increased and the belt starts rubbing against the running deck. To re-apply
“Silicone Oil” to the treadmill, lift up the belt, one side at a time, and apply the oil
directly to the center of the running deck. Allow the silicone oil to 'set' for one
minute before using the treadmill.
Attention: Only use "Silicone Oil" lubricants for this equipment. In addition, do
not add any other type of oil; otherwise the treadmill will be damaged. Do
not over-lubricate the walking board. Excess lubricant should be wiped off
with a clean towel.
21
LUBRICATION
Loading ...
Loading ...
Loading ...