Loading ...
Loading ...
Loading ...
CALORIES: Displays the total cumulative calories burned during your workout.
Press START/STOP button to start exercising. The walking belt starts moving at
speed of 0.4 MPH. You may press the SPEED UP or SPEED DOWN button on
the computer console or right handlebar to increase or decrease walking speed
during exercise. You may also pre-set target calories in STOP mode before
training. To set CALORIES press the MODE button until you see the CALORIES
begin blinking. Press the SET button to set CALORIES. The pre-set target
calories range is from 0 to 9990 calories. Once you pre-set target calories, press
the START/STOP button to start exercising. The walking belt starts moving with
the speed at 0.4 MPH. You may press the SPEED UP or SPEED DOWN button
on the computer console or right handlebar to increase or decrease the running
speed during exercise. Calories start counting down from pre-set target calories
to 0. When the pre-set target calories count down to 0, the computer will begin
beeping to remind you. The treadmill will stop operation automatically.
NOTE: If you leave the equipment and it is not operated for over 4 minutes, the
computer will display (shows up) the clock (time) and room temperature; that is
called sleep mode. In sleep mode, all other functions will turn off. All previous
pre-set data and training data are kept and will show up when any button is
pressed.
COMPUTER
17
Loading ...
Loading ...
Loading ...