Loading ...
Loading ...
Loading ...
Belt Adjustment:
The belt is adjusted at the factory; it may come loose during transportation and/or
from use. After prolong use of the treadmill, the belt will stretch out. If the belt
is shifting to the left, turn on the main power switch of treadmill and let the belt run
at the speed of 1-1.5 MPH. Using the Allen wrench provided, turn the left rear
roller adjustment bolt 1/4 turn in the clockwise direction. You should see the belt
start to correct itself by moving back toward the center. Repeat the above
procedure until the belt is properly centered. If the belt is shifting to the right, turn
on the main power switch of treadmill and let the belt run at the speed of
1-1.5 MPH. Using the Allen wrench provided, turn the right rear roller adjustment
bolt 1/4 turn in the clockwise direction. You should see the belt start to correct
itself by moving back toward the center. Repeat the above procedure until the
belt is properly centered. If the belt is slipping during use, turn off and unplugged
the treadmill. Using the Allen wrench provided, turn both left and right rear roller
adjustment bolts 1/4 turn in the clockwise direction for the same amount, then turn
on the main power switch of treadmill and let the belt run at the speed of
1-1.5 MPH. You should now walk on to the belt to determine if the belt is still
slipping. Repeat the above procedure until the belt no longer slips.
19
ADJUSTMENTS
Loading ...
Loading ...
Loading ...